Lists where JoyPro finds the key mapping of IL-2 Korea on this PC. The first one is what engine il2korea scan,
engine il2korea import and engine il2korea export use when you give no path. Detect in the Other Games panel
(Start page, Expert import) runs it and puts the first one into File / Folder.
engine il2korea paths --text
Advanced
<install>\data\input\general.actions first, then the other *.actions files of that folder (newest first).
<install> is the installation JoyPro found (data\input or game\data\input below it).
A warning says when the folder or the file is missing: start the game, open Settings > Key mapping and press ACCEPT
once.
No options. Reads only; it also works while the game runs or when it is not installed.
Technical internals
Output: JSON (Game, DisplayName, ConfigPaths, Warnings), or text with --text ("IL-2 Series: Korea Config
Paths", "Paths: " and one line per location). Exit code 0, also when nothing was found (empty list).
What it does Lists where JoyPro looks for this game's controls on this machine: files, folders or registry keys (your config location from games config set first). A file the game has not written yet can be listed (e.g. Arma Reforger's JoyPro.conf, Project Wingman's Input.ini).
Lists the IL-2 Korea actions JoyPro manages (its command list): id, axis or button, category and title. An export
writes only these actions, and the relation editor and the search list them.
engine il2korea catalog --text
Advanced
The list is %LOCALAPPDATA%\JoyPro2\GameData\DB\IL2Korea\actions.tsv (when that folder does not exist, the
DB\IL2Korea folder next to the engine).
It is built from your general.actions by engine il2korea refresh-db, or by the first scan, import or export.
catalog only shows the list; it never builds it. Titles that look like ids are shown readable.
No options. Reads only; works without the game installed.
Technical internals
Output: JSON (Game, Source, Actions with Id, Title, IsAxis, Category, Warnings), or text with
--text ("IL-2 Series: Korea Action Catalog", "Source:", "Actions: ", then ` | axis|button | |` per action).
Without a list: the warning IL-2 Series: Korea action catalog not found: <path> and an empty list, exit code 0.
What it does Lists every action of JoyPro's command list of this game with its kind and category: <data>\GameData\DB\<Game>\actions.tsv, else the program folder's DB\<Game>.
Shows the joystick binds IL-2 Korea has now, without changing your profile or the game. Use it to look before an
import. Look first on the game's card of the Start page and Scan in the Other Games panel run it.
engine il2korea scan --text
Advanced
It reads general.actions with known.devices.json (device numbers), general.pitch and shared.responses
(curves).
Path (positional or --path): the install folder, the data\input folder, the game's exe or an .actions file.
--ignore-device <name> / --ignore-devices <a;b> (separated by | or ;, --ignore-devices also by commas) leave the binds of those devices out
(a name without {GUID} means every device of that name); a step line names them and counts the binds.
Keyboard binds JoyPro reads in this game are listed too; engine il2korea import takes them only with
--include-keyboard.
Safety: reads only and is not refused while the game runs. It is refused when the game is not installed (set its
folder: engine games install set) or switched off in Settings > Games.
A fresh install has no command list yet: the first scan builds it from the installed game and saves it (a step line
says so).
Technical internals
Output: JSON (ConfigPath, BindingsRead, Bindings with ActionId, Device, Input, IsAxis, Reformers,
Inverted, then Steps, Warnings, Errors), or text with --text ("IL-2 Series: Korea Scan", "Config:",
"Bindings Read:" and the list).
Exit code 0; 1 when the result has errors, for example No IL-2 Series: Korea config file found. Pass the path explicitly.
Unknown options fail with Unknown IL2Korea scan argument(s): ...; MSFS options (--game-profile,
--include-disconnected, --include-sim-defaults) are refused.
Binds of the vJoy device JoyPro forwards into (--vjoy-tunnel) are left out.
What it does Reads the game's controls (its control file or folder, or registry values for Nuclear Option and Tiny Combat Arena; Ace Combat 8 stores none) and shows the joystick binds, without changing the profile. Without a command list yet (fresh install) it first builds the list from the game and saves it.
Option
Values
Meaning
--path
<config-path>
Optional explicit path override. Use when you prefer option form over positional path.
--ignore-device
<name>
Leave the binds of this device out (one per flag; a name without {GUID} means every device of that name). Example: --ignore-device 'vJoy Device'.
--ignore-devices
<csv>
Leave the binds of these devices out (separated by commas, | or ;). Example: --ignore-devices 'vJoy Device,Old Pedals'.
In the game Reads IL-2 Series: Korea's files only; nothing changes in the game. A scan only shows what an import would bring and does not change the profile. IL-2 Series: Korea details · what each mode changes
Example
engine il2korea scan --text
How the options interact
--ignore-device / --ignore-devices leave the binds of those devices out of the scan or import (the result names how many).
--ignore-device(s): the binds of these devices are left out
For beginners
Reads the key mapping of IL-2 Series: Korea into your JoyPro profile: every action on a stick, throttle, pedals or
panel, with modifiers, the invert of each axis and the values of the curve editor. Nothing in the game changes. The GUI
runs it with Import on the IL-2 Series: Korea card of the Start page.
It reads <install>\data\input\general.actions with known.devices.json (device numbers), general.pitch and
shared.responses (curves). <install> is steamapps\common\IL2Series, or the game folder below the standalone
launcher. The game writes general.actions when you press ACCEPT in Key mapping once.
Default: adds to the open profile (--merge means the same); --replace replaces every relation of the profile by
what Korea has.
--include-keyboard also reads the keyboard keys of the actions.
Curves and Relative Control come in as the relation's Korea tuning; JoyPro's names, groups, modifiers and tuning come
back from general.actions.joypro-meta.json.
Safety: reads only, not refused while the game runs; the profile is kept as "Before import from IL-2 Series: Korea"
first.
--ignore-device <name> / --ignore-devices <a;b> leave the binds of those devices out (a name without
{GUID} means every device of that name); a step line says how many binds were left out.
Technical internals
Output: JSON of the import result or a text report with --text; exit code 1 on an error (No IL-2 Series: Korea config file found. Pass the path explicitly.).
The path may be the install folder, the data\input folder or the file itself. Without a path it reads the first
location of engine il2korea paths; a fresh install builds the command list first.
With --profile the profile is saved afterwards. The imported inputs are recorded as JoyPro's in
<file>.joypro.json, and a game JoyPro never exported to is watched from now on.
What it does Imports the game's joystick binds into the loaded profile (merged by default; --replace starts from an empty relation list). Without a command list yet it first builds the list from the game.
Option
Values
Meaning
--path
<config-path>
Optional explicit path override. Use when you prefer option form over positional path.
--replace
switch (no value)
For game import: start from an empty relation list instead of merging into the loaded profile.
--include-keyboard
switch (no value)
--ignore-device
<name>
Leave the binds of this device out (one per flag; a name without {GUID} means every device of that name). Example: --ignore-device 'vJoy Device'.
--ignore-devices
<csv>
Leave the binds of these devices out (separated by commas, | or ;). Example: --ignore-devices 'vJoy Device,Old Pedals'.
In the game Reads IL-2 Series: Korea's files only; nothing changes in the game. The binds come into the profile as relations; JoyPro's own data next to the game file brings back names, groups, modifiers and curves. IL-2 Series: Korea details · what each mode changes
Flight only: clean takes over the devices it writes, nuke clears unused devices; --ignore-device(s) and --vjoy-tunnel devices are never cleared
For beginners
Writes your binds into the key mapping of IL-2 Series: Korea and gives each device you write a device number, as the
game's own dialog does. Close the game first. The GUI's Export now on the IL-2 Series: Korea card runs it.
It writes data\input\general.actions, known.devices.json, the curves in general.pitch and shared.responses,
and the input settings you stored into data\NSData\UserData\UserSettings.json.
--mode
In the game
add
nothing is removed; a bind whose input the game uses for another action is listed, not written
merge
your binds go in; the game's other inputs stay, except a game bind on an input you give another action
merge-overwrite (engine default)
as merge, and every action you bind loses its other joystick inputs (keyboard only with --include-keyboard)
clean (GUI default)
every joystick input of the devices you write is released, then your binds go in
--nuke-untouched-devices: connected devices without a bind in your profile lose their joystick inputs (not with
add).
--include-keyboard also writes your keyboard binds; without it keyboard keys never change.
A device JoyPro writes keeps its number; a connected device without one gets the lowest free number from 1. A device
without a number that is not connected is skipped.
Never touched: keyboard keys, mouse inputs, key pairs on axes, devices that are not connected, lines the import
cannot read, --ignore-device(s), the --vjoy-tunnel device, current.map.
Safety: refused while IL2Series runs; backed up first (undo: engine backups list); the profile is kept as "Before
export to IL-2 Series: Korea". --dry-run writes nothing. A folder Windows does not let JoyPro write is reported
instead of writing half the files.
Technical internals
Output: JSON of the export result or a text report with --text; exit code 1 on an error (IL-2 Series: Korea is running (IL2Series). Close the game first; it overwrites its config on exit., an invalid --mode, no file found).
What it does Writes the profile's binds for this game. Only the flight actions JoyPro manages are changed, the game must be closed, and the game's files are backed up first (engine backups). Without a command list yet it first builds the list from the game.
Option
Values
Meaning
--path
<config-path>
Optional explicit path override. Use when you prefer option form over positional path.
--mode
cleanaddmergemerge-overwrite
Export mode for DCS/IL2 export commands: clean, add, merge, merge-overwrite.
--dry-run
switch (no value)
Report what the export would write; the game's files are not changed.
In the game Writes into IL-2 Series: Korea's control files while the game is closed (refused while it runs), after a backup. Combat flight sims and combat flight games that read several joysticks. Bind file: <install>\data\input\general.actions (JSON) + known.devices.json; curves in general.pitch / shared.responses; settings in data\NSData\UserData\UserSettings.json. IL-2 Series: Korea details · what each mode changes
Reads the installed game or <source-path> and adds its new actions to the catalog, the known ones stay; writes it only when it changes
For beginners
Builds JoyPro's IL-2 Korea command list from your key mapping file, or adds the actions that are new. Run it after a
game update, or when JoyPro says the list is missing. Refresh DB in the Other Games panel (its DB Source
box is the path) and the Start page's notice "Command lists to build or update" run it.
engine il2korea refresh-db --dry-run --text
Advanced
It reads every action id of general.actions (or of the install folder, data\input folder or file given as the
path); an action whose inputs are axes is an axis.
Titles: JoyPro's own action texts, else the known title, else IL-2 Great Battles' description of the same id (from
JoyPro's IL-2 list or the installed Great Battles' .actions files), else one made from the id.
Known actions stay in the list.
--dry-run reads everything and writes nothing (step "Dry run: nothing was written."). Without it the list is
written only when it changed.
Safety: only JoyPro's list changes, never a game file; it is refused when the game is not installed or switched off
in Settings > Games. The GUI can cancel it while the game's files are read; nothing is written then.
Technical internals
Output: JSON of the refresh (DryRun, FilesWritten, Steps with Actions: <old> -> <new>, Warnings,
Errors), or text with --text.
Exit code 0; 1 when nothing could be read: the read error of the file (for example when the game has not written
general.actions yet); the list stays unchanged.
Writes %LOCALAPPDATA%\JoyPro2\GameData\DB\IL2Korea\actions.tsv (with a header line that has the date). After a
real run the game's build is recorded for engine db check-updates.