Shows where JoyPro finds ACE COMBAT 7's binds on this PC:
%LOCALAPPDATA%\BANDAI NAMCO Entertainment\ACE COMBAT 7\Config\Input.ini, which the game writes when it closes with
your devices connected. Detect in the import wizard's Expert import section runs it.
engine ac7 paths --text
Advanced
No options. Listed: your own config location of engine games config set first, then Input.ini when it exists.
Read-only; also works when the game is not installed or switched off.
Technical internals
Output: JSON (Game, DisplayName, ConfigPaths, Warnings), or with --textACE COMBAT 7: Skies Unknown Config Paths, Paths: <n> and the file. Exit code 0; an unknown option fails with Unknown AceCombat7 paths argument(s): ....
What it does Lists where JoyPro looks for this game's controls on this machine: files, folders or registry keys (your config location from games config set first). A file the game has not written yet can be listed (e.g. Arma Reforger's JoyPro.conf, Project Wingman's Input.ini).
Lists the ACE COMBAT 7 flight actions JoyPro knows (the Flight_* keys of Input.ini), with axis or button and
category.
engine ac7 catalog --text
Advanced
No options; read-only, also when the game is not installed.
Categories: Flight axes, Flight and Hat. Before a list was built from your Input.ini, JoyPro lists its own
20 flight actions; engine ac7 refresh-db, or the first scan, import or export, builds the list from the file.
Technical internals
Output: JSON (Game, Source, Actions with Id, Title, IsAxis, Category, Warnings), or with --text
one line per action <id> | axis|button | <category> | <title>. Exit code 0.
What it does Lists every action of JoyPro's command list of this game with its kind and category: <data>\GameData\DB\<Game>\actions.tsv, else the program folder's DB\<Game>.
Shows the flight-stick binds ACE COMBAT 7 has in its Input.ini for your connected devices, without changing your
profile or the game. Look first in the import wizard runs it.
engine ac7 scan --text
Advanced
Reads the [Joystick-<product GUID>] sections of the file engine ac7 paths lists, or of the file given (positional
or --path): axes with invert (:R), buttons and hat directions.
A section of a model that is not connected is skipped with a warning; two devices of one model share a section and
are read for the first. Combinations and half axes (:P, :N, :C) are not read (warning each).
--ignore-device <name> / --ignore-devices <a;b> leave the binds of those devices out.
Safety: reads only, also while the game runs; a fresh install first builds and saves the command list. Refused when
the game is not installed or switched off in Settings > Games.
Technical internals
Output: JSON (Game, Actionscan, ConfigPath, BindingsRead, Bindings, Steps, Warnings, Errors), or
a text report with --text.
Exit code 0; 1 on an error (No ACE COMBAT 7: Skies Unknown config file found. Pass the path explicitly.).
Unknown options fail with Unknown AceCombat7 scan argument(s): ....
What it does Reads the game's controls (its control file or folder, or registry values for Nuclear Option and Tiny Combat Arena; Ace Combat 8 stores none) and shows the joystick binds, without changing the profile. Without a command list yet (fresh install) it first builds the list from the game and saves it.
Option
Values
Meaning
--path
<config-path>
Optional explicit path override. Use when you prefer option form over positional path.
--ignore-device
<name>
Leave the binds of this device out (one per flag; a name without {GUID} means every device of that name). Example: --ignore-device 'vJoy Device'.
--ignore-devices
<csv>
Leave the binds of these devices out (separated by commas, | or ;). Example: --ignore-devices 'vJoy Device,Old Pedals'.
--ignore-device(s): the binds of these devices are left out
For beginners
Reads the flight-stick binds of ACE COMBAT 7: Skies Unknown from its Input.ini into your JoyPro profile. Nothing in
the game changes. Start the game once with every device connected first, so it writes a section per device. The GUI
runs it with Import on the ACE COMBAT 7 card of the Start page.
It reads %LOCALAPPDATA%\BANDAI NAMCO Entertainment\ACE COMBAT 7\Config\Input.ini: one [Joystick-<product GUID>]
section per device model with its Flight_* keys.
Default: adds to the open profile (--merge means the same); --replace replaces every relation of the profile by
what the file has.
No keyboard or modifier binds; --include-keyboard changes nothing. Invert (:R) comes in, no curves.
Two sticks of the same model share one section.
Safety: reads only, not refused while the game runs; the profile is kept as "Before import from ACE COMBAT 7: Skies
Unknown" first.
--ignore-device <name> / --ignore-devices <a;b> leave the binds of those devices out (a name without
{GUID} means every device of that name); a step line says how many binds were left out.
Technical internals
Output: JSON of the import result or a text report with --text; exit code 1 on an error (No ACE COMBAT 7: Skies Unknown config file found. Pass the path explicitly.).
Without a path it reads the file engine ac7 paths lists first. Before the file exists JoyPro lists its own 20 flight
actions; engine ac7 refresh-db builds the list from the file.
With --profile the profile is saved afterwards; a game JoyPro never exported to is watched from now on.
What it does Imports the game's joystick binds into the loaded profile (merged by default; --replace starts from an empty relation list). Without a command list yet it first builds the list from the game.
Option
Values
Meaning
--path
<config-path>
Optional explicit path override. Use when you prefer option form over positional path.
--replace
switch (no value)
For game import: start from an empty relation list instead of merging into the loaded profile.
--include-keyboard
switch (no value)
--ignore-device
<name>
Leave the binds of this device out (one per flag; a name without {GUID} means every device of that name). Example: --ignore-device 'vJoy Device'.
--ignore-devices
<csv>
Leave the binds of these devices out (separated by commas, | or ;). Example: --ignore-devices 'vJoy Device,Old Pedals'.
In the game Reads ACE COMBAT 7: Skies Unknown's files only; nothing changes in the game. The binds come into the profile as relations; JoyPro's own data next to the game file brings back names, groups, modifiers and curves. ACE COMBAT 7: Skies Unknown details · what each mode changes
Flight only: clean takes over the devices it writes, nuke clears unused devices; --ignore-device(s) and --vjoy-tunnel devices are never cleared
For beginners
Writes your binds into ACE COMBAT 7's Input.ini, one section per device model. Close the game first. The GUI's
Export now on the ACE COMBAT 7 card runs it.
One input per action and device. ACE COMBAT 7 counts as a flight-only game.
--mode
In Input.ini
add
an action that already has a value on that device keeps it; a bind on an input the game uses for another action gets a mark "Not written to the game"
merge
the profile's value is written; another action on the same input is released; the action's values on other devices stay
merge-overwrite (engine default)
as merge, and every action the profile binds is cleared on the other connected devices
clean (GUI default)
the sections JoyPro writes keep only your readable values; a written axis is still cleared on the other connected devices
--nuke-untouched-devices: the readable values of the other connected devices are cleared (not with add).
The game averages one axis action over all devices: merge reports such an axis; merge-overwrite clears it on the
others.
A device without a section is skipped ("start the game once with this device connected").
Never touched: the keyboard, menu keys (UI_*), combinations JoyPro does not read, sections of devices that are not
connected, --ignore-device(s), the --vjoy-tunnel device; comments, order, encoding and line ends.
Safety: refused while Ace7Game or Ace7Game-Win64-Shipping runs; backed up first (undo: engine backups list);
the profile is kept as "Before export to ACE COMBAT 7: Skies Unknown". --dry-run writes nothing.
Technical internals
Output: JSON of the export result or a text report with --text; exit code 1 on an error (the game runs, an
invalid --mode, no file found).
What it does Writes the profile's binds for this game. Only the flight actions JoyPro manages are changed, the game must be closed, and the game's files are backed up first (engine backups). Without a command list yet it first builds the list from the game.
Option
Values
Meaning
--path
<config-path>
Optional explicit path override. Use when you prefer option form over positional path.
--mode
cleanaddmergemerge-overwrite
Export mode for DCS/IL2 export commands: clean, add, merge, merge-overwrite.
--dry-run
switch (no value)
Report what the export would write; the game's files are not changed.
In the game Writes into ACE COMBAT 7: Skies Unknown's control files while the game is closed (refused while it runs), after a backup. Arcade flight games and shooters that read one joystick, only Xbox pads, or a fixed layout (docs: one-device-games.md). Bind file: %LOCALAPPDATA%\BANDAI NAMCO Entertainment\ACE COMBAT 7\Config\Input.ini (ini, one section per device model). ACE COMBAT 7: Skies Unknown details · what each mode changes
Rebuilds the catalog from the installed game or <source-path>: actions the game no longer has are dropped; writes it only when it changes
For beginners
Builds JoyPro's ACE COMBAT 7 command list from your Input.ini: every Flight_* key of the device sections. Start the
game once with your devices connected first. Update on the ACE COMBAT 7 card of the Start page runs it.
engine ac7 refresh-db --text
Advanced
Reads the file engine ac7 paths lists; a path (positional or --path) may name another Input.ini, a folder means
the default file.
The list is rebuilt from the file. --dry-run writes nothing; otherwise the list is written only when it changed.
Refused when the game is not installed or switched off in Settings > Games; the game may run.
Technical internals
Output: JSON of the refresh (DryRun, FilesWritten, Steps such as Read <n> flight action(s) from <file>. and
Actions: <old> -> <new>, Warnings, Errors), or a text report with --text.
Exit code 0; 1 when nothing could be read: Input.ini not found (<path>): start ACE COMBAT 7 once with your devices connected. or <path> has no device section with Flight_ binds yet: ...; the list stays unchanged.
What it does Rebuilds the catalog from the installed game or <source-path>: actions the game no longer has are dropped; writes it only when it changes.
Option
Values
Meaning
--path
<source-path>
Same as <source-path>: the game's installation or a file of the game to read the actions from.
--dry-run
switch (no value)
Report what the command would do; nothing is written or changed.